ATP10 BRECOFLEX® Belts
Polyurethane, steel reinforced, extruded open length & joined – High Power ATP Profile in metric pitch with optimised tooth form.
ATP10 & ATP10-DL BRECOFLEX®
Available endless lengths for ATP10:
- For preferred lengths refer to tables
- Belts under 1,500mm not available
- Over 1,500mm belt lengths available in multiples of 1 tooth
- Over 12,000mm please enquire
| Belt widths (mm) Intermediate belt widths on request | |||||
|---|---|---|---|---|---|
| 16 | 25 | 32 | 50 | 75 | 100 |
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth |
|---|---|---|---|
| 1500 | 150 | 3350 | 335 |
| 1600 | 160 | 3550 | 355 |
| 1700 | 170 | 3750 | 375 |
| 1900 | 190 | 4000 | 400 |
| 2000 | 200 | 4250 | 425 |
| 2120 | 212 | 4500 | 450 |
| 2240 | 224 | 4750 | 475 |
| 2360 | 236 | 5000 | 500 |
| 2500 | 250 | 5300 | 530 |
| 2650 | 265 | 5600 | 560 |
| 2800 | 280 | 6000 | 600 |
| 3000 | 300 | 6300 | 630 |
| 3150 | 315 |
| ATP10 /ATP10-DL – Allowable tensile load | |||||||
|---|---|---|---|---|---|---|---|
| Belt width | Belt width | 16 | 25 | 32 | 50 | 75 | 100 |
| Tension member loadings | Fadm(N) | 2000 | 3500 | 4750 | 7750 | 12000 | 16000 |
| Belt weight (kg/m) | ATP 10 | 0.096 | 0.150 | 0.192 | 0.300 | 0.450 | 0.600 |
| ATP 10-DL | 0.097 | 0.154 | 0.200 | 0.316 | 0.477 | 0.636 | |
| ATP10 BFX | Available lengths & versions | |
| Standard lengths | See table on the left | |
|---|---|---|
| Any number of teeth available from |
1,100mm up to 12,000mm | |
| Intermediate lengths | From 1,100mm | o |
| Standard Plus version | 1,100mm up to 12,000mm | |
| Over 12,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel or Aramid tension member | – | |
| DL | o | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Drive Type A
| Type A | ATP10 | ATP10-DL | ATP10-E |
|---|---|---|---|
| Zmin | 15 | 25 | 12 |
| dmin | 50 | 80 | 50 |
 |
|||
Drive Type B
| Type B | ATP10 | ATP10-DL | ATP10-E |
|---|---|---|---|
| Zmin | 25 | 25 | 20 |
| dmin | 120 | 120 | 80 |
 |
|||
Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)
Related Products:
(2 votes, average: 5.00 out of 5)
Loading...