ATS15 BRECOFLEX® & ATS15 BRECO® Open Length (M) Joined (V)
Polyurethane, steel reinforced, extruded – High Power AT Profile in metric pitch with trapezoidal tooth form.
| ATS15 BFX | Available lengths & versions | |
|---|---|---|
| Standard lengths | – | |
| Any number of teeth available from | 1,500mm up to 22,000mm | |
| Minimum Purchase Amount | 1 Sleeve | |
| Standard Plus version | 1,500mm up to 22,000mm | |
| Over 22,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | – | |
| Stainless Steel tension member | o | |
| PAZ | x | |
| DL | o2) | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, minimum purchase amount may apply
o Minimum purchase amount on request
– Not available
Technical Specification
| BRECOFLEX® ATS15/ATS15-DL Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | Belt width | 25 | 32 | 50 | 75 | 100 |
| Tension memberloadings | Fadm(N) | 6150 | 7995 | 12915 | 19680 | 26445 |
| Belt Weight(kg/m) | ATS15 | 0.219 | 0.280 | 0.438 | 0.656 | 0.875 |
| Belt Weight(kg/m) | ATS15-DL | 0.294 | 0.377 | 0.589 | 0.883 | 1.178 |
| ATS 15 (M/V) | Available lengths and versions |
|---|---|
| Standard delivery lengths (M) | Roll of 50m or 100m |
| Cut to lengths/lengths > 50m | On request |
| Minimum length joined (V) | – |
| Standard material | TPUST11) |
| Steel tension member (standard) | x |
| E tension member | – |
| Stainless Steel or Aramid member | o |
| PAZ | x |
| PAR | – |
| PAZ-PAR | – |
| DL/DL-PAZ | – |
| DR/DR-PAZ | – |
| T/T- PAZ | – |
1) Further materials on request
2) Only inner siide can be coated
3) Data suitable for both BRECOFLEX and BRECO (M)
Technical Specification
| BRECO® ATS15/(M) Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | Belt width | 25 | 50 | 75 | 100 | 150 |
| Tension memberloadings | Fadm(N) | 6765 | 13530 | 20295 | 27080 | 40590 |
| Belt Weight(kg/m) | ATS15M | 0.250 | 0.500 | 0.750 | 1.000 | 1.500 |
Drive Type A3)
| Type A | ATP15 | ATP15-DL |
|---|---|---|
| Zmin | 25 | 40 |
| dmin | 120 | 250 |
 |
||
Drive Type B3)
| Type B | ATP15 | ATP15-DL |
|---|---|---|
| Zmin | 40 | 40 |
| dmin | 250 | 250 |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...