AT5 Standard & GEN III SYNCHROFLEX®
Polyurethane, Steel reinforced, cast truly endless – High Power AT Profile in metric pitch with trapezoidal tooth form.
CONTI SYNCHROFLEX® timing belt AT5
Available version:
- Single-sided
- With E tension member for better flexibility
- With reinforced design upon request
- With Aramid tension member upon request
- Polyurethane special materials upon request
- Antistatic, coloured, mechanical reworked
CONTI SYNCHROFLEX® timing belt AT5 GEN III
Standard version:
- Single-sided red
- High performance composite PU
- Steel cord tension members with high density two filament construction
- 25% more power than standard AT
| Standard stock lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Std. | GEN III |
|---|---|---|---|
| 195 | 39 |  |
|
| 225 | 45 | |
|
| 255 | 51 | |
|
| 260 | 52 | |
|
| 280 | 56 | |
|
| 300 | 60 | |
|
| 330 | 66 | |
|
| 340 | 68 | |
|
| 375 | 75 | |
|
| 390 | 78 | |
|
| 420 | 84 | |
|
| 450 | 90 | |
|
| 455 | 91 | |
|
| 480 | 96 | |
|
| 490 | 98 | |
|
| 500 | 100 | |
|
| 525 | 105 | |
|
| 545 | 109 | |
|
| 545 FA | 109 | |
|
| 600 | 120 | |
|
| 610 | 122 | |
|
| 620 | 124 | |
|
| Length | No. teeth | Std. | GEN III |
|---|---|---|---|
| 630 | 126 | |
|
| 660 | 132 | |
|
| 670 | 134 | |
|
| 690 | 138 | |
|
| 710 | 142 | |
|
| 720 | 144 | |
|
| 750 | 150 | |
|
| 780 | 156 | |
|
| 825 | 165 | |
|
| 860 | 172 | |
|
| 875 | 175 | |
|
| 900 | 180 | |
|
| 920 | 184 | |
|
| 975 | 195 | |
|
| 1050 | 210 | |
|
| 1125 | 225 | |
|
| 1230 | 246 | |
|
| 1500 | 300 | |
|
| 1750 | 350 | |
|
| 2000 | 400 | |
|
| 3800 FA | 760 | – | |
Preferred belt width in mm: 6, 10, 16, 25, 32, 50, 75, 100. Other dimensions on request.
✓ Available
◯ Available on request
– Unavailable
FA with bigger back thickness
FN with profiles on the back of the belt
Technical Specification
| Standard (belt widths) | b (mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
| Tension member loadings | Fadm(N) | 350 | 700 | 1260 | 2030 | 2660 | 4200 | 6370 | 8610 |
| Belt weight | kg/m | 0,020 | 0,034 | 0,054 | 0,085 | 0,109 | 0,170 | 0,255 | 0,340 |
| GEN III (belt widths) |
b (mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
| Tension member loadings | Fadm(N) | 417 | 787 | 1342 | 2175 | 2823 | 4489 | 6803 | 9117 |
| Belt weight | kg/m | 0,022 | 0,036 | 0,058 | 0,090 | 0,115 | 0,180 | 0,270 | 0,360 |
Drive Type A
| Type A | AT5 | GEN III |
| Zmin | 15 | 15 |
| dmin | 25 | 25 |
 |
||
Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)
Drive Type B
| Type B | AT5 | GEN III |
| Zmin | 20 | 20 |
| dmin | 60 | 60 |
 |
||
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...