ATP15 BRECOFLEX® Belts
Polyurethane, steel reinforced, extruded truly endless – High Power ATP Profile in metric pitch with optimised tooth form.
ATP15 & ATP15-DL BRECOFLEX®
Available endless lengths for ATP15:
- For preferred lengths refer to tables
- Belts under 1,500mm not available
- Over 1,500mm belt lengths available in multiples of 1 tooth
- Over 12,000mm please enquire
| ATP15 BFX | Available lengths & versions | |
| Standard lengths | See table on the right | |
|---|---|---|
| Any number of teeth available from | 1,500mm up to 12,000mm | |
| Intermediate lengths | from 1,500mm | o |
| Standard Plus version | 1,500mm up to 12,000mm | |
| Over 12,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel or Aramid tension member | – | |
| DL | o | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
| Belt widths (mm) Intermediate belt widths on request | |||||
|---|---|---|---|---|---|
| 25 | 32 | 50 | 75 | 100 | 150 |
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth |
| 1740 | 116 | 3450 | 230 |
|---|---|---|---|
| 1965 | 131 | 3675 | 245 |
| 2100 | 140 | 3900 | 260 |
| 2250 | 150 | 4125 | 275 |
| 2385 | 159 | 4500 | 300 |
| 2520 | 168 | 4875 | 325 |
| 2670 | 178 | 5250 | 350 |
| 2805 | 187 | 5625 | 375 |
| 3000 | 200 | 6000 | 400 |
| 3225 | 215 | ||
| ATP15/ATP15-DL | |||||||
|---|---|---|---|---|---|---|---|
| Belt width | Belt width | 25 | 32 | 50 | 75 | 100 | 150 |
| Tension member loadings | Fadm(N) | 4950 | 6750 | 11250 | 17550 | 23850 | 36450 |
| Belt weight (kg/m) | ATP15 | 0.200 | 0.256 | 0.400 | 0.600 | 0.800 | 1.200 |
| ATP 15-DL | 0.210 | 0.272 | 0.432 | 0.654 | 0.876 | – | |
Drive Type A
| Type A | ATP15 | ATP15-DL |
|---|---|---|
| Zmin | 20 | 25 |
| dmin | 100 | 120 |
 |
||
Drive Type B
| Type B | ATP15 | ATP15-DL |
|---|---|---|
| Zmin | 30 | 30 |
| dmin | 160 | 160 |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...