AT10 BRECOmove® Open Length M
BRECOmove® AT10
The BRECOmove® timing belt demonstrates its strengths, in addition to high power transmission, particular in linear technology applications. The very high stiffness of the belt is the basis for excellent dynamic behaviour with short settling times and high positioning accuracy. This makes BRECOmove® an excellent alternative to comparable timing belts, offering great potential for optimisation.
| Belt widths b (mm) (in-between belt widths on request) | ||||
|---|---|---|---|---|
| 25 | 32 | 50 | 75 | 100 |
| BRECOmove® AT10 MOV | Available lengths and versions |
| Standard delivery lengths | 50 or 100 mm rolls |
| Cut to lengths/ lengths > 100m | on request |
| Standard material | TPUST1 |
| move tension member (standard) |
Steel |
| E tension member | Not available |
| VA tension member | Not available |
| Laminate coating on the tooth side (standard) |
Red |
| Belt colour | White/red |
| BRECOmove® AT10 MOV | Admissible tension cord strength Fadm/Belt weight | |||||
| Belt width | b (mm) | 25 | 32 | 50 | 75 | 100 |
|---|---|---|---|---|---|---|
| move-tension member | Fadm(N) | 7395 | 9135 | 14790 | 22185 | 29580 |
| Spec. elasticity | Cspec(N) | 1,85-106 | 2,25-106 | 3,70-106 | 5,55-106 | 7,40-106 |
| Belt weight | kg/m | 0,175 | 0,221 | 0,351 | 0,526 | 0,701 |
Drive Type A
| Without contra-flexure | Standard move tension member |  |
|---|---|---|
| Zmin | 18 | |
| dmin | 60 |
Drive Type B
| With contra-flexure | Standard move tension member |  |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 |
Zmin = Minimum number of teeth / dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...