AT15 BRECOFLEXmove®
BRECOFLEXmove® AT15
The BRECOFLEXmove® is a timing belt specifically designed for high performance drives and traction drives with a particularly high stiffness requirement. A newly developed Steel cord tension member increases belt stiffness and tear-resistance, making transmission of stronger forces possible. The tooth flank geometry has been optimised through the Finite Element Method (FEM). This leads to an optimisation of the contact pressure distribution and reduces the work of friction between the timing belts and tooth washer, thus minimising wear. In addition, a friction optimised laminate coating is applied to the tooth side. The AT15move timing belts are much stiffer than the ATS15, AT20 and ATL20 timing belts of the same width.
| Belt widths b (mm) | ||||
|---|---|---|---|---|
| 25 | 32 | 50 | 75 | 100 |
| BRECOFLEXmove®AT15 MOV | Available lengths and versions |
| Standard delivery lengths (M) | See table on the right |
| Any number of teeth available from |
1,410mm – 30,495mm |
| Intermediate lengths | Minimum order number on request |
| Standard material | TPUST1 |
| E tension member | Not available |
| VA tension member | Not available |
| Laminate coating on the tooth side (standard) |
Red |
| Belt colour | White/red |
| BRECOFLEXmove® AT15 MOV | Admissible tension cord strength Fadm/Belt weight | |||||
| Belt width | b (mm) | 25 | 32 | 50 | 75 | 100 |
|---|---|---|---|---|---|---|
| move-tension member | Fadm(N) | 8450 | 11050 | 17550 | 26000 | 35100 |
| Belt weight | kg/m | 0,237 | 0,303 | 0,473 | 0,710 | 0,946 |
Drive Type A
| Without contra-flexure | Standard move tension member |  |
|---|---|---|
| Zmin | 20 | |
| dmin | 95 |
Drive Type B
| With contra-flexure | Standard move tension member |  |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 |
Zmin = Minimum number of teeth / dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...