Metric Moulded Bevel Gear Sets, DELRIN® 500 2:1 Ratio, 0.5 – 1.0 MOD
- Intermediate sizes and special bevels to drawing (tooling charges may apply)
- Standard tolerances, unless otherwise stated ±0.25 mm
- Shaft axis to intersect within ±0.025mm
- Angular accuracy between shafts ±5mins
- Mounting distance tolerance ±0.05mm
- Bore tolerance -0.02 / -0.04mm
- Max. recommended working temperature 90°C
- 20° pressure angle
- Supplied in pairs
- All dimensions in mm
- Moulded DELRIN® 500 to gear quality AGMA 7
| Code | Pitch module | No. teeth | Bore -0.02/-0.04 |
dp (mm) | de(mm) | F(mm) | A+V (mm) | dm (mm) | Lm(mm) | S (mm) | A(mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DRB05/2 | 0.5 | 40 | 4 | 20 | 20.29 | 2.5 | 12 | 12 | 4 | 1.33 | 8.33 |
| 0.5 | 20 | 3 | 10 | 11.2 | 2.5 | 16 | 8 | 4 | 0 | 8.46 | |
| DRB08/2 | 0.8 | 40 | 5 | 32 | 32.47 | 3.5 | 18 | 15 | 6 | 1.9 | 11.91 |
| 0.8 | 20 | 4 | 16 | 17.92 | 3.5 | 24 | 12 | 5 | 0 | 11.5 | |
| DRB10/2 | 1 | 40 | 6 | 40 | 40.59 | 4.5 | 22 | 18 | 7 | 2.45 | 14.45 |
| 1 | 20 | 5 | 20 | 22.4 | 4.5 | 30 | 15 | 7 | 0 | 14.49 |
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.
| Code | Bore Ø(mm) | Outside Ø D (mm) | Length F(mm) | Use with |
|---|---|---|---|---|
| OB4612 | 4 | 6 | 12 | DRB10 |
- Intermediate sizes and
- special bushes to drawing
- (tooling charges may apply)
- All dimensions in mm
- Bore tolerance G7
- OD tolerance s7
- Length tolerance js13
(1 votes, average: 5.00 out of 5)
Loading...