Metric Bevel Gears Hostaform 4:1 &5:1 Ratio 1.0 – 2.0 MOD
- Intermediate sizes and special mitres to drawing
- DIN 3964, DIN 3967, DIN 3971
- Standard tolerances, unless otherwise stated ±0.25 mm
- Shaft axis to intersect within ±0.025mm
- Angular accuracy between shafts ±5mins
- Mounting distance tolerance ±0.05mm
- Bore tolerance H9
- Cut to the Gleason System
- 20° pressure angle
- Supplied in pairs
- All dimensions in mm
-
White HOSTAFORM® C
- Also available in hard-wearing Polyketone material
| Ratio 4 : 1 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | Pitch module | No. teeth | dp (mm) | de (mm) | dm (mm) | Bore H9 |
F(mm) | Lm(mm) | A(mm) | A+V (mm) | S(mm) |
| WPRB10/4 | 1 | 10 | 10 | 12 | 7.8 | 4 | 8.2 | 9.3 | 17.7 | 30.1 | 0 |
| 1 | 40 | 40 | 40.8 | 23.4 | 10 | 8.2 | 10.8 | 17 | 20.1 | 1.3 | |
| WPRB15/4 | 1.5 | 10 | 15 | 18 | 11.3 | 5 | 12 | 10.9 | 23.5 | 41.7 | 0 |
| 1.5 | 40 | 60 | 61.2 | 30.4 | 12 | 12 | 12.8 | 21.7 | 26.2 | 1.7 | |
| WPRB20/4 | 2 | 10 | 20 | 23.8 | 14.3 | 6 | 16 | 12.8 | 28.9 | 54 | 0 |
| 2 | 40 | 80 | 81.5 | 36 | 18 | 16 | 16.6 | 27 | 32.5 | 2.3 | |
| Ratio 5 : 1 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | Pitch module | No. teeth | dp (mm) | de (mm) | dm (mm) | Bore H9 |
F (mm) | Lm (mm) | A (mm) | A+V (mm) | S (mm) |
| WPRB10/5 | 1 | 12 | 12 | 13.7 | 9.5 | 4 | 9.5 | 10 | 20.3 | 40.5 | 0 |
| 1 | 60 | 60 | 60.4 | 20.5 | 10 | 9.5 | 11 | 17.4 | 21 | 1.9 | |
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.
News / Case Studies
Gears and Racks Available in Hard-wearing Polyketone
TransDev can supply Driveflex plastic gears in a highly wear-resistant material that is ideal for ...
Read More
(1 votes, average: 5.00 out of 5)
Loading...