ATN12.7-K6 BRECO® Transport
Polyurethane, Steel reinforced, extruded open length & joined, classic imperial pitch with trapezoidal toothform.
aATN12.7-K6 DC Measurements within drawing are increased by 0.9mm where indicated
BRECO® timing belts ATN12.7-K6
- Polyurethane, steel reinforced, modular flight system belting
- High Power AT Profile in metric pitch with trapezoidal toothform
- ATN belting is extruded on a form wheel with insert holes on every tooth spacing.
Available types for ATN12.7-K6
- Single sidedNylon tooth facing (PAZ)
- Belts under 1,075mm with PAZ nylon tooth facing
- Nylon both sides (PAZ/PAR)
- Special polyurethanes upon request (see below)
- Antistatic, coloured belts
- Mechanical joint
Allowable tensile load by belt width
| BRECO ATN12.7-K6 /ATN12.7-K6 DC (M/V) | Tension cord strengths F/Specific elasticities/Belts weights | ||||
| Belt width (mm) | 50 | 75 | 100 | ||
|---|---|---|---|---|---|
| (M) Steel cord tension member F (N) | 6000 | 9000 | 12000 | ||
| (V) Steel cord tension member F (N) | 2000 | 3000 | 4000 | ||
| Belt weight ATN12.7 (kg/m) | 0,226 | 0,340 | 0,453 | ||
| Belt weight ATN12.7 DC (kg/m) | 0,286 | 0,430 | 0,573 | ||
| Belt width | 50 | 75 | 100 | |
|---|---|---|---|---|
| No. of insert holes per tooth | 2 | 3 | 4 | |
| Insert hole pitch spacing | 25 | 25 | 25 | |
| V Guide position | Symmetrical | Asymmetrical | ||
| Minimum belt length | 880mm | |||
| ATN12.7-K6/ATN12.7-K6 DC (M/V)) | Available lengths and versions |
|---|---|
| Standard delivery lengths (M) | Rolls of 50 or 100m |
| Cut to lengths/lengths > 110m | On request |
| Endless Joined, minimum length (V) | 880mm |
| Standard material | TPUST 1 |
| Steel cord tension member (standard) | x |
| VA tension memeber | o |
| PAZ (white) | x |
| PAR (green) | x |
| PAZ-PAR (white/green) | x |
Drive Type A
| Type A | ATN12.7-K6 |
|---|---|
| Zmin | 20 |
| dmin | 80 |
 |
|
Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)
| Material | TPUST1 | TPUKF1** | TPUFDA1* |
|---|---|---|---|
| Applications | Standard use | Flexible at low temperatures | Contact with food stuffs |
| Properties | – | 0.006 -25°C to +5°C | FDA approved |
| Inserts | |||
|---|---|---|---|
| Type | Plastic | Brass | Stainless Steel |
| Material | Nylon | MS 58 F36 | To DIN 7500 |
| Application | Small Loads | Medium and high loads Low temperature Higher dynamic loads |
Medium and high loads Normal temperature Higher dynamic loads Corrosion resistance |
X Available,
O Minimum purchase amount on request,
* With Stainless Steel tension members,
** On request, minimum quantities may apply.
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...