BRECO® Mechanical Joint System
The BRECO® mechanical joint system gives the designer ever more versatility in the design and development of modular conveying systems. The BRECO® mechanical joint comprises of a prepared, finger Joined belt to the required length, a number of tooth clamps and matching top plates and the screws to join the whole system together.
The system can be used on ATN10 and ATN12.7 pitches and on belt widths from 50mm wide to 100mm wide. All joint parts can be of food quality materials if necessary. Top plates can be replaced with normal full width ATN profiles wherever required.
Mechanical joint type ‘C’
- Tooth thickness of belt = + 0.9mm
- Belt teeth machined for connecting bars
- Joint length = 10 teeth = 9 pitches
- Back plates screw on the back of the belt
- Profiles cannot be mounted over the joint
Mechanical joint type ‘DC’
- Overall belt thickness increases by +0.9mm
- Belt teeth and back machined for connecting bars and back plates
- Joint length = 10 teeth = 9 pitches
- Back plates countersunk into the back of the belt
- Profiles cannot be mounted over the joint
Mechanical Joint type ‘DC-PRO’
- Belt teeth and back machined for connecting bars and back plates
- Joint length = 10 teeth = 9 pitches
- Back plates countersunk into the back of the belt
- Profiles can be mounted over the joint
Belt widths (mm) with available mechanical joints
| Belt width | 50 | 75 | 100 |
| T10, AT10, ATN10, ATN10K6 |
C, DC DC-PRO |
C, DC DC-PRO |
C, DC DC-PRO |
|---|---|---|---|
| ATN12.7 ATN12.7K6 |
C, DC DC-PRO |
C, DC DC-PRO |
C, DC DC-PRO |
| ATN20 | C, DC DC-PRO |
C, DC DC-PRO |
C, DC DC-PRO |
| ATNS20 | C, DC DC-PRO |
C, DC DC-PRO |
– |
(1 votes, average: 5.00 out of 5)
Loading...