T1/5 (XL) BRECOFLEX®
Polyurethane, Steel reinforced, extruded truly endless. Classic imperial pitch with trapezoidal toothform.
BRECOFLEX® timing belts T1/5″ (XL)
- Single-sided
- Nylon tooth facing (PAZ)
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
| T1/5″ L BFX | Available lengths and versions | |
| Standard stock lengths (M) | See table on right | |
|---|---|---|
| Minimum purchase amount | 1 Sleeve | |
| Further lengths | On request | |
| Standard material | TPUST31) | |
| Steel tension member (standard) | x | |
| E tension member | – | |
| Stainless Steel tension member | – | |
| PAZ | x | |
| PAR | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T- PAZ | – | |
x Available
o Minimum purchase amount on request
– Not available
1) Further materials on request
Technical Specification
| T 1/5 (XL) – Allowable tensile load by belt width | |||||||
| Belt width | Belt width | 6.35 | 7.94 | 9.53 | 12.7 | 19.1 | 25.4 |
|---|---|---|---|---|---|---|---|
| Tension member loadings | Fadm(N) | 180 | 240 | 300 | 420 | 690 | 930 |
| T2.5 Belt weight | kg/m | 0.016 | 0.020 | 0.024 | 0.030 | 0.038 | 0.061 |
| Preferred Belt widths b (mm) Intermediate and larger width upon request | |||||||
| 6.35 | 7.94 | 9.53 | 12.7 | 19.1 | 25.4 | ||
| 1/4″ | 5/16″ | 3/8″ | 1/2″ | 3/4″ | 1″ | ||
| Standard lengths (mm)/Number of teeth |
| Type | Length | No. teeth | Type | Length | No. teeth |
|---|---|---|---|---|---|
| 60 XL | 152.40 | 30 | 170 XL | 431.80 | 85 |
| 70 XL | 177.80 | 35 | 180 XL | 457.20 | 90 |
| 80 XL | 203.20 | 40 | 190 XL | 482.60 | 95 |
| 90 XL | 228.60 | 45 | 200 XL | 508.00 | 100 |
| 100 XL | 254.00 | 50 | 210 XL | 533.40 | 105 |
| 110 XL | 279.40 | 55 | 220 XL | 558.20 | 110 |
| 120 XL | 304.80 | 60 | 230 XL | 584.20 | 115 |
| 130 XL | 330.20 | 65 | 240 XL | 609.60 | 120 |
| 140 XL | 355.60 | 70 | 250 XL | 635.00 | 125 |
| 150 XL | 381.00 | 75 | 260 XL | 660.40 | 130 |
| 160 XL | 406.40 | 80 |
Drive Type A
| Type A | T1/5 (XL) | |
|---|---|---|
| Zmin | 10 | |
| dmin | 30 | |
 |
||
Drive Type B
| Type A | T1/5 (XL) | |
|---|---|---|
| Zmin | 15 | |
| dmin | 30 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...