T7/8 (XH) BRECOFLEX®
Polyurethane, steel reinforced, extruded truly endless. Classic imperial pitch with trapezoidal toothform.
Available types for T7/8″ (XH)
- Single sided
- Nylon tooth facing (PAZ)
- Special Polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
| Standard lengths (mm)/Number of teeth |
|---|
| Type | Length | No. teeth | Type | Length | No. teeth |
|---|---|---|---|---|---|
| 560 XH | 1422.40 | 64 | 1400 XH | 3556.00 | 160 |
| 630 XH | 1600.20 | 72 | 1540 XH | 3911.60 | 176 |
| 700 XH | 1778.00 | 80 | 1750 XH | 4445.00 | 200 |
| 770 XH | 1955.80 | 88 | 1960 XH | 4978.40 | 224 |
| 840 XH | 2133.60 | 96 | 2275 XH | 5778.50 | 260 |
| 980 XH | 2489.20 | 112 | 2450 XH | 6223.00 | 280 |
| 1120 XH | 2844.80 | 128 | 3500 XH | 8890.00 | 400 |
| 1260 XH | 3200.40 | 144 |
Drive Type A
| Type A | T7/8 (XH) | |
| Zmin | 18 | |
| dmin | 150 | |
 |
||
Drive Type B
| Type B | T7/8 (XH) | |
| Zmin | 25 | |
| dmin | 180 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
| Preferred Belt widths b (mm) Intermediate and larger width upon request |
||
|---|---|---|
| 50.8 | 76.2 | 101.6 |
| 2″ | 3″ | 4″ |
| T7/8 (XH) | Available lengths and versions | |
|---|---|---|
| Standard lengths | See table on the left | |
| Any number of teeth available from |
1,422.4mm up to 16,002mm | |
| Intermediate lengths | From 1,422.4mm | o |
| Standard Plus version | 1,422.4mm up to 16,002mm | |
| Over 16,002mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | – | |
| Stainless Steeltension member | – | |
| PAZ | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Technical Specification
| T7/8 ” (XH) – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 50.8 | 76.2 | 101.6 | ||
| Tension member loadings | Fadm(N) | 7750 | 12000 | 16250 | ||
| Belt weight | kg/m | 0.530 | 0.795 | 1.059 | ||
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...