K1.5 Standard CONTI SYNCHROFLEX®
Standard serrated metric pitch profile.
Available types for K1.5
- Single-sided
- Available with Aramid tension members
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
Technical Specification
| K1.5 – Allowable tensile load by belt width | ||||
|---|---|---|---|---|
| Belt width | Belt width | 4 | 6 | 10 |
| Tension member loadings | Fadm(N) | 39 | 65 | 117 |
| Belt weight | kg/m | 0.004 | 0.006 | 0.010 |
Pulleys non-stock, supplied to order only
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Stock length |
|---|---|---|
| 57.0 | 38 | ◯ |
| 64.5 | 43 |  |
| 67.5 | 45 | ◯ |
| 100.5 | 67 | |
| 141.0 | 94 | ◯ |
| 165.0 | 110 | |
| 201.0 | 134 | |
| 228.0 | 152 | ◯ |
| 286.0 | 191 | ◯ |
| 300.0 | 200 | |
| 400.5 | 267 | |
| 501.0 | 334 | |
| 600.0 | 400 | |
| 1242.5 | 828 | ◯ |
| 1671.5 | 1114 | ◯ |
Preferred belt width in mm: 4, 6, 10. – Other dimensions on request
✓ Available
◯ Available on request
Drive Type A
| Type A | K1.5 |  |
|---|---|---|
| Zmin | 14 | |
| dmin | 15 |
Drive Type B
| Type B | K1.5 |  |
|---|---|---|
| Zmin | 20 | |
| dmin | 15 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...