T5 BRECO® Open length (M)/joined (V)
Polyurethane, Steel reinforced, extruded open length & joined, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.
Available types of T5
- Single-sided
- Single sided with E tension members
- Special Polyurethanes upon request
- Nylon tooth facing (PAZ)
- Antistatic, coloured, machined, ground and punched belts
- Clamp plates and end connections
Technical Specification
T5 – Allowable tensile load by belt width | |||||||||
---|---|---|---|---|---|---|---|---|---|
Belt width | b(mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
Tension member loadings Fadm(N) |
M | 180 | 300 | 540 | 840 | 1080 | 1680 | 2520 | 3360 |
V | – | 150 | 270 | 420 | 540 | 840 | 1260 | 1680 | |
Belt weight (Kg/m) |
T5 | 0.013 | 0.021 | 0.034 | 0.053 | 0.068 | 0.106 | 0.160 | 0.233 |
T5-DL | – | 0.030 | 0.044 | 0.070 | 0.090 | 0.139 | 0.208 | 0.280 | |
T5-DR | – | 0.039 | 0.063 | 0.098 | 0.126 | 0.196 | 0.294 | 0.378 | |
T5-T | – | 0.039 | 0.063 | 0.098 | 0.126 | 0.196 | 0.294 | 0.392 |
Drive Type A
Type A | T5 | T5-DL | T5-DR | T5-T | |
---|---|---|---|---|---|
Zmin | 10 | 15 | 20 | 20 | |
dmin | 30 | 30 | 30 | 30 |
Drive Type B
Type B | T5 | T5-DL | T5-DR | T5-T | |
---|---|---|---|---|---|
Zmin | 15 | 15 | 20 | 20 | |
dmin | 30 | 30 | 60 | 60 |
Belt widths (mm)Intermediate belt widths on request | |||||||
---|---|---|---|---|---|---|---|
6* | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
T5 (M/V) | Available lengths and versions | |
Standard deliverylengths (M) | Rolls of 50 or 100m | |
---|---|---|
Cut to lengths/lengths > 100m | On request | |
Minimum length joined (V) |
b (mm) =10 | 880mm |
DL | 1,000mm | |
Standard material | TPUST1(1 | |
Steel tension member(standard) | x | |
E tension member | 0 | |
Stainless Steeltension member | 0 | |
PAZ | x | |
PAR | x | |
PAZ-PAR | x | |
DL/DL-PAZ | 0 | |
DR/DR-PAZ | 0 | |
T/T-PAZ | 0 |
x Available
o Minimum purchase amount on request
– Not available
1) Further materials on request