T5 BRECOFLEX®
Polyurethane, steel reinforced, extruded truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.
Available endless lengths for T5
- For preferred lengths refer to table
- Under 1,075mm further lengths on request
- Belts under 1,075mm with PAZ nylon tooth facing
- Over 1,075mm belts lengths available in multiples of 1 tooth
- Over 15,000mm please enquire
| T5 BFX | Available lengths & versions | |
|---|---|---|
| Standard lengths | See table on the right | |
| Minimum purchase amount | up to 690mm | 1 sleeve |
| Any number of teeth available from | 720mm up to 15,000mm | |
| Intermediate lengths | from 720mm | o |
| Standard Plus version | 720mm up to 15,000mm | |
| Over 15,000mm | On request | |
| Standard material | up to 690mm | TPUST3 |
| from 720mm | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel or Aramid tension member | o | |
| PAZ | x | |
| DL/DL-PAZ | from 900mm | o |
| DR/DR-PAZ | from 900mm | o |
| T/T-PAZ | o | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Technical Specification
| T5 – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 10 | 16 | 25 | 32 | 50 |
| Tension member loadings |
Fadm(N) | 330 | 570 | 930 | 1200 | 1920 |
| Belt weight (kg/m) |
T5 | 0.022 | 0.034 | 0.052 | 0.067 | 0.105 |
| T5-DL | 0.028 | 0.045 | 0.072 | 0.099 | 0.141 | |
| T5-DR | 0.036 | 0.057 | 0.090 | 0.115 | 0.180 | |
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth | Length | No. teeth |
| 200 | 40 | 560 | 112 | 1800 | 360 |
|---|---|---|---|---|---|
| 215 | 43 | 575 | 115 | 1900 | 380 |
| 220 | 44 | 610 | 122 | 2000 | 400 |
| 225 | 45 | 620 | 124 | 2120 | 424 |
| 240 | 48 | 630 | 126 | 2240 | 448 |
| 245 | 49 | 660 | 132 | 2360 | 472 |
| 255 | 51 | 690 | 138 | 2500 | 500 |
| 260 | 52 | 720 | 144 | 2650 | 530 |
| 270 | 54 | 750 | 150 | 2800 | 560 |
| 280 | 56 | 755 | 151 | 3000 | 600 |
| 295 | 59 | 780 | 156 | 3150 | 630 |
| 305 | 61 | 800 | 160 | 3350 | 670 |
| 330 | 66 | 815 | 163 | 3550 | 710 |
| 340 | 68 | 840 | 168 | 3750 | 750 |
| 355 | 71 | 850 | 170 | 4000 | 800 |
| 365 | 73 | 860 | 172 | 4250 | 850 |
| 370 | 74 | 900 | 180 | 4500 | 900 |
| 390 | 78 | 945 | 189 | 4750 | 950 |
| 400 | 80 | 990 | 198 | 5000 | 1000 |
| 410 | 82 | 1040 | 208 | 5300 | 1060 |
| 420 | 84 | 1075 | 215 | 5600 | 1120 |
| 435 | 87 | 1100 | 220 | 6000 | 1200 |
| 455 | 91 | 1215 | 243 | 6300 | 1260 |
| 480 | 96 | 1380 | 276 | 6700 | 1340 |
| 500 | 100 | 1400 | 280 | 7100 | 1420 |
| 510 | 102 | 1500 | 300 | 7500 | 1500 |
| 525 | 105 | 1600 | 320 | ||
| 545 | 109 | 1700 | 340 |
Preferred belt width b (mm) 6,10,16,25,32,50 – other dimensions upon request
Drive Type A
| Type A | T5 | T5-DR |  |
|---|---|---|---|
| Zmin | 10 | 20 | |
| dmin | 30 | 30 |
Drive Type B
| Type B | T5 | T5-DR |  |
|---|---|---|---|
| Zmin | 15 | 20 | |
| dmin | 30 | 60 |
Zmin = Minimum number of teeth / dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...