T2.5 BRECO® Open Length (M)/Joined (V)
Polyurethane, steel reinforced, extruded open length & joined, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.
Technical Specification
| T2.5 – Allowable tensile load by belt width | ||||
|---|---|---|---|---|
| Belt width | Belt width | 8 | 10 | 20 |
| Tension member loadings Fadm(N) | M | 77 | 98 | 196 |
| V | 38 | 49 | 98 | |
| Belt weight | kg/m | 0.01 | 0.015 | 0.03 |
Drive Type A
| Type A | T2.5 |  |
|---|---|---|
| Zmin | 15 | |
| dmin | 15 |
Drive Type B
| Type A | T2.5 |  |
|---|---|---|
| Zmin | 18 | |
| dmin | 18 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
BRECO® timing belt T2.5
- Polyurethane, steel reinforced, extruded open length
- Standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform
Available types for T2.5:
- Single-sided
- Special Polyurethane upon request
- Antistatic, coloured, machined, ground & punched belts
- Clamps plates and end connections
| Belt widths (mm) Intermediate belt widths on request | ||
|---|---|---|
| 8 | 10 | 20 |
| T2.5 (M/V) | Available lengths and versions |
|---|---|
| Standard delivery lengths (M) | Rolls of 100m |
| Cut to lengths/lengths > 100m | On request |
| Minimum length joined (V) | 350mm |
| Standard material | TPUST1) |
| Steel tension member (standard) | x |
| E tension member | – |
| Stainless Steel or Aramid member | – |
| PAZ | – |
| PAR | – |
| PAZ-PAR | – |
| DL/DL-PAZ | – |
| DR/DR-PAZ | – |
| T/T- PAZ | – |
x Available
o Minimum purchase amount on request
– Not available
1) Further materials on request
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...