T2 Standard CONTI SYNCHROFLEX®
Polyurethane, steel reinforced, cast truly endless, standard profile T profile with metric pitch and trapezoidal teeth.
CONTI SYNCHROFLEX® timing belt T2
Standard profile T profile with metric pitch and trapezoidal teeth. The technical data refers to standard polyurethane and standard steel cord tension members.
Available types for T2:
- Single-sided
- Increased back thickness (FA)
- Available with Aramid tension members
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
Technical Specification
T2 – Allowable tensile load by belt width | ||||||
---|---|---|---|---|---|---|
Belt width | Belt width | 4 | 6 | 10 | 16 | 25 |
Tension member loadings | Fadm(N) | 39 | 65 | 117 | 195 | 312 |
Belt weight | kg/m | 0.004 | 0.007 | 0.011 | 0.018 | 0.028 |
Pulleys non-stock, supplied to order only
Drive Type A
Type A | T2 | |
---|---|---|
Zmin | 10 | |
dmin | 15 |
Drive Type B
Type B | T2 | |
---|---|---|
Zmin | 18 | |
dmin | 15 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Standard lengths (mm)/Number of teeth |
---|
Length | No. teeth | Stock lengths |
---|---|---|
68 | 34 | |
90 | 45 | |
108 | 56 | |
118 | 59 | |
120 | 60 | |
120 FA | 60 | ◯ |
138 | 69 | |
140 | 70 | |
144 | 72 | |
150 | 75 | |
160 | 80 | |
180 | 90 | |
200 | 100 | |
220 | 110 | |
220 FA | 110 | ◯ |
220 FN2 | 110 | ◯ |
240 | 120 | |
256 | 128 | |
262 | 131 | |
280 | 140 | |
292 | 146 | |
320 | 160 | |
360 | 180 | |
600 | 300 | |
710 | 355 | |
710 FA | 355 | ◯ |
1296 FA | 648 | ◯ |
Preferred belt width in mm: 4, 6, 10. Limited other lengths available on request
✓ Available
◯ Available on request
– Unavailable
FA with bigger back thickness
FN with profiles on the back of the belt