DRIVELOCK® 11 Bushes

• Self-centering
• Very high torques 784 to 419860 Nm
• Bores 25 to 300mm
• Imperial bore also available*

Machining data
Recommended shaft & hub tolerances for full torque transmission are:
Shafts	h8	Hub	H8

Stock no.	d (h8) (mm)	D (mm)	M (screws)	L (mm)	B (mm)	T_s Nm	T Nm	F kN	p N/mm²
DL11/ 25	25	55	M6	46	40	17	784	65	99
DL11/ 28	28	55	M6	46	40	17	882	65	99
DL11/ 30	30	55	M6	46	40	17	931	65	99
DL11/ 35	35	60	M6	60	54	17	1274	72	85
DL11/ 38	38	75	M8	62	54	41	2696	142	113
DL11/ 40	40	75	M8	62	54	41	2843	142	113
DL11/ 42	42	75	M8	62	54	41	2981	142	113
DL11/ 45	45	75	M8	62	54	41	3196	142	113
DL11/ 48	48	80	M8	62	54	41	3873	161	96
DL11/ 50	50	80	M8	72	64	41	4069	161	96
DL11/ 55	55	85	M8	72	64	41	5050	182	101
DL11/ 60	60	90	M8	72	64	41	6080	203	103
DL11/ 65	65	95	M8	72	64	41	6619	203	98
DL11/ 70	70	110	M8	88	78	83	11277	322	111
DL11/ 75	75	115	M10	88	78	83	12062	322	111
DL11/ 80	80	120	M10	88	78	83	14219	355	112
DL11/ 85	85	125	M10	88	78	83	15102	355	112
DL11/ 90	90	130	M10	88	78	83	17455	382	112
DL11/ 95	95	135	M10	88	78	83	18338	382	112
DL11/ 100	100	145	M12	112	100	145	25791	516	104
DL11/ 110	110	155	M12	112	100	145	31184	564	107
DL11/ 120	120	165	M12	112	100	145	39618	657	117
DL11/ 130	130	180	M14	130	116	230	50503	774	109
DL11/ 140	140	190	M14	130	116	230	63470	902	121
DL11/ 150	150	200	M14	130	116	230	72790	967	124
DL11/ 160	160	210	M14	130	116	230	82890	1030	125
DL11/ 170	170	225	M16	164	148	355	106000	1255	110
DL11/ 180	180	235	M16	164	148	355	120900	1343	112
DL11/ 190	190	250	M16	164	148	355	131250	1432	113
DL11/ 200	200	260	M16	164	148	355	143220	1432	110
DL11/ 220	220	285	M16	164	148	355	177560	1608	112
DL11/ 240	240	305	M16	164	148	355	213850	1785	116
DL11/ 260	260	325	M16	164	148	355	245250	1883	114
DL11/ 280	280	355	M20	197	177	690	353160	2500	115
DL11/ 300	300	375	M20	197	177	690	419860	2795	120

*NB: Imperial bore Drivelocks can be manufactured, please enquire!

(1 votes, average: 5.00 out of 5)

Signup