DRIVELOCK® 95 Bushes
• For connection of coaxial shafts
• Medium torques 200 to 4280 Nm
• Bores 17 to 80mm
• Imperial bore also available**
| Machining data | |||
|---|---|---|---|
| Recommended shaft & hub tolerances for full torque transmission are: |
|||
| Shafts | h8 | Hub | H8 |
| Stock no. | d (mm) | D (mm) | B (mm) | L (mm) | M (screws) | Ts (Nm) | T (Nm) | F (kN) |
|---|---|---|---|---|---|---|---|---|
|
DL95/ 17
|
17* | 50 | 50 | 56 | M6 | 17 | 200 | 24 |
|
DL95/ 18
|
18 | 50 | 50 | 56 | M6 | 17 | 220 | 24 |
|
DL95/ 19
|
19 | 50 | 50 | 56 | M6 | 17 | 230 | 24 |
|
DL95/ 20
|
20 | 50 | 50 | 56 | M6 | 17 | 240 | 24 |
|
DL95/ 24
|
24 | 55 | 60 | 66 | M6 | 17 | 290 | 24 |
|
DL95/ 25
|
25 | 55 | 60 | 66 | M6 | 17 | 450 | 36 |
|
DL95/ 28
|
28 | 60 | 60 | 66 | M6 | 17 | 510 | 36 |
|
DL95/ 30
|
30 | 60 | 60 | 66 | M6 | 17 | 550 | 36 |
|
DL95/ 32
|
32 | 63 | 60 | 66 | M6 | 17 | 580 | 36 |
|
DL95/ 35
|
35 | 75 | 75 | 83 | M8 | 41 | 760 | 45 |
|
DL95/ 38
|
38 | 75 | 75 | 83 | M8 | 41 | 850 | 45 |
|
DL95/ 40
|
40 | 75 | 75 | 83 | M8 | 41 | 900 | 45 |
|
DL95/ 42
|
42 | 78 | 75 | 83 | M8 | 41 | 930 | 45 |
|
DL95/ 45
|
45 | 85 | 85 | 93 | M8 | 41 | 1520 | 67 |
|
DL95/ 48
|
48 | 90 | 85 | 93 | M8 | 41 | 1600 | 67 |
|
DL95/ 50
|
50 | 90 | 85 | 93 | M8 | 41 | 1690 | 67 |
|
DL95/ 55
|
55 | 94 | 85 | 93 | M8 | 41 | 2430 | 90 |
|
DL95/ 60
|
60 | 100 | 85 | 93 | M8 | 41 | 2680 | 90 |
|
DL95/ 65
|
65 | 105 | 85 | 93 | M8 | 41 | 2930 | 90 |
|
DL95/ 70
|
70 | 115 | 100 | 110 | M10 | 83 | 3720 | 107 |
|
DL95/ 75
|
75* | 125 | 100 | 110 | M10 | 83 | 3970 | 107 |
|
DL95/ 80
|
80* | 125 | 100 | 110 | M10 | 83 | 4280 | 107 |
* available on request
**NB: Imperial bore Drivelocks can be manufactured, please enquire!
(1 votes, average: 5.00 out of 5)
Loading...