DRIVELOCK® 80 Bushes in Stainless Steel

• Stainless Steel (303 / 304)
• Self-centering for thin walled hubs
• Low torques 22 to 910 Nm
• Bores 10 to 50mm
• Imperial bore also available*

Machining data
Recommended shaft & hub tolerances for full torque transmission are:
Shafts	h8	Hub	H8

Stock no.	d (mm)	D (mm)	D1 (mm)	A (mm)	B (mm)	L (mm)	M (screws)	T_s (Nm)	T( Nm)	F (kN)	p (N/mm²⁾
DL80/ 10SS	10	16	29	14	27	31	M4	2	22	4	51
DL80/ 12SS	12	18	32	14	28	32	M4	2	26	4	46
DL80/ 14SS	14	23	38	14	28	32	M4	2	30	4	36
DL80/ 15SS	15	24	44	16	37	43	M6	8	73	10	67
DL80/ 16SS	16	24	44	16	37	43	M6	8	78	10	67
DL80/ 18SS	18	26	47	18	39	45	M6	8	87	10	55
DL80/ 19SS	19	27	49	18	39	45	M6	8	92	10	53
DL80/ 20SS	20	28	50	18	39	45	M6	8	97	10	51
DL80/ 22SS	22	32	54	25	46	52	M6	8	105	10	32
DL80/ 24SS	24	34	56	25	46	52	M6	8	175	15	45
DL80/ 25SS	25	34	56	25	46	52	M6	8	180	15	45
DL80/ 28SS	28	39	61	25	46	52	M6	8	200	15	40
DL80/ 30SS	30	41	62	25	46	52	M6	8	220	15	38
DL80/ 32SS	32	43	65	25	46	52	M6	8	310	19	48
DL80/ 35SS	35	47	66	32	53	59	M6	8	340	19	34
DL80/ 38SS	38	50	72	32	53	59	M6	8	370	19	32
DL80/ 40SS	40	53	75	32	53	59	M6	8	390	19	30
DL80/ 42SS	42	55	78	32	53	59	M6	8	410	19	29
DL80/ 45SS	45	59	86	45	70	78	M8	18	820	36	36
DL80/ 48SS	48	62	87	45	70	78	M8	18	880	36	35
DL80/ 50SS	50	65	92	45	70	78	M8	18	910	36	33

*NB: Imperial bore Drivelocks can be manufactured, please enquire!

Related Products:

(1 votes, average: 5.00 out of 5)