DRIVELOCK® 61 Bushes in Stainless Steel
• Stainless Steel (303 / 304)
• Self-centering
• Low torques 3 to 400Nm
• Bores 6 to 40mm
• Imperial bore also available*
| Machining data | |||
| Recommended shaft & hub tolerances for full torque transmission are: |
|||
| Shafts | h8 | Hub | H8 |
| Stock no. | d (h8) (mm) | D (mm) | L1 (mm) | L (mm) | M (screws) | Ts Nm | T Nm | F kN | p N/mm2 |
|---|---|---|---|---|---|---|---|---|---|
|
DL61/ 6SS
|
6 | 16 | 11 | 13.5 | M2.5 | 0.5 | 3 | 0.9 | 19 |
|
DL61/ 7SS
|
7 | 17 | 11 | 13.5 | M2.5 | 0.5 | 3 | 0.9 | 17 |
|
DL61/ 8SS
|
8 | 18 | 11 | 13.5 | M2.5 | 0.5 | 4 | 0.9 | 17 |
|
DL61/ 9SS
|
9 | 20 | 13 | 15.5 | M2.5 | 0.5 | 4 | 0.9 | 17 |
|
DL61/ 10SS
|
10 | 20 | 13 | 15.5 | M2.5 | 0.5 | 6 | 1.2 | 17 |
|
DL61/ 12SS
|
12 | 22 | 13 | 15.5 | M2.5 | 0.5 | 7 | 1.2 | 15 |
|
DL61/ 14SS
|
14 | 26 | 17 | 20 | M3 | 0.9 | 13 | 1.9 | 15 |
|
DL61/ 15SS
|
15 | 28 | 17 | 20 | M3 | 0.9 | 14 | 1.9 | 14 |
|
DL61/ 16SS
|
16 | 32 | 17 | 21 | M4 | 2.2 | 28 | 3.5 | 23 |
|
DL61/ 17SS
|
17 | 35 | 21 | 25 | M4 | 2.2 | 30 | 3.5 | 17 |
|
DL61/ 18SS
|
18 | 35 | 21 | 25 | M4 | 2.2 | 32 | 3.5 | 17 |
|
DL61/ 19SS
|
19 | 35 | 21 | 25 | M4 | 2.2 | 34 | 3.5 | 17 |
|
DL61/ 20SS
|
20 | 38 | 21 | 26 | M5 | 4.2 | 55 | 5.5 | 24 |
|
DL61/ 22SS
|
22 | 40 | 21 | 26 | M5 | 4.2 | 61 | 5.5 | 23 |
|
DL61/ 24SS
|
24 | 47 | 26 | 32 | M6 | 7.3 | 96 | 8 | 23 |
|
DL61/ 25SS
|
25 | 47 | 26 | 32 | M6 | 7.3 | 100 | 8 | 23 |
|
DL61/ 28SS
|
28 | 50 | 26 | 32 | M6 | 7.3 | 210 | 15 | 32 |
|
DL61/ 30SS
|
30 | 55 | 26 | 32 | M6 | 7.3 | 220 | 15 | 29 |
|
DL61/ 32SS
|
32 | 55 | 26 | 32 | M6 | 7.3 | 240 | 15 | 29 |
|
DL61/ 35SS
|
35 | 60 | 29 | 35 | M6 | 7.3 | 350 | 20 | 32 |
|
DL61/ 38SS
|
38 | 65 | 29 | 35 | M6 | 7.3 | 380 | 20 | 29 |
|
DL61/ 40SS
|
40 | 65 | 29 | 35 | M6 | 7.3 | 400 | 20 | 29 |
*NB: Imperial bore Drivelocks can be manufactured, please enquire!
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...