SFAT20 BRECOFLEX®
Polyurethane, Steel reinforced, extruded open length & joined High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
BRECOFLEX® timing belts SFAT20
- Polyurethane, Steel reinforced, joined & open length belting
- High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
Available endless lengths for SFAT20:
- For preferred lengths refer to table
- Over 1,500mm belts lengths available in multiples of 1 tooth*
- Over 22,000mm please enquire
Please note:
- *Minimum quantities may apply
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth | Length | No. teeth |
| 1500 | 75 | 2500 | 125 | 5000 | 250 |
|---|---|---|---|---|---|
| 1600 | 80 | 2800 | 140 | 5600 | 280 |
| 1700 | 85 | 3000 | 150 | 6000 | 300 |
| 1800 | 90 | 3560 | 178 | 6700 | 335 |
| 1900 | 95 | 3760 | 188 | 7100 | 355 |
| 2000 | 100 | 4000 | 200 | 7500 | 375 |
| 2240 | 112 | 4500 | 225 |
Technical Specification
| SFAT 20 – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 50 | 75 | 100 | ||
| Tension member loadings |
Fadm(N) | 10000 | 15600 | 21200 | ||
| Belt weight | kg/m | 0.480 | 0.720 | 0.960 | ||
| Belt widths (mm) Intermediate belt widths on request | ||
|---|---|---|
| 50 | 75 | 100 |
| T5 BFX | Available lengths & versions | |
|---|---|---|
| Standard lengths | See table on the left | |
| Any number of teeth available from | 1,500mm up to 22,000mm | |
| Intermediate lengths | from 1,500mm | o |
| Standard Plus version | 1,500mm up to 22,00mm | |
| Over 22,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel tension member | o | |
| PAZ | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Drive Type A
| Type A | SFAT20 | |
|---|---|---|
| Zmin | 18 | |
| dmin | 120 | |
 |
||
Drive Type B
| Type B | SFAT20 | |
|---|---|---|
| Zmin | 25 | |
| dmin | 180 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...