ATK10 K6 BRECO® Open Length (M)/Joined (V)
Polyurethane, steel reinforced, extruded open length & joined High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
BRECO® timing belts ATK10K6
- Polyurethane, steel reinforced, joined & open length belting
- High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
Available types for ATK10K6
- Single sided
- Nylon tooth facing (PAZ)
- Nylon back facing (PAR)
- Nylon both facing (PAZ/PAR)
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
Technical Specification
| ATK10K6 – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 50 | ||||
| Tension memberloadings | M | 7500 | ||||
| V | 3750 | |||||
| Belt weight | kg/m | 0.302 | ||||
| Belt widths (mm) Intermediate belt widths on request |
|---|
| 50 |
| ATK10K6 (M/V) | Available lengths and versions |
| Standard delivery lengths (M) | Rolls of 50 or 100m |
|---|---|
| Cut to lengths/lengths > 100m | On request |
| Minimum length joined (V) | 880mm |
| Standard material | TPUST1) |
| Steel tension member (standard) | x |
| E tension member | – |
| Stainless Steel tension member | o |
| PAZ | x |
| PAR | x |
| PAZ-PAR | x |
| DL/DL-PAZ | – |
| DR/DR-PAZ | – |
| T/T- PAZ | – |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Drive Type A
| Type A | ATK10K6 | |
|---|---|---|
| Zmin | 20 | |
| dmin | 60 | |
 |
||
Drive Type B
| Type B | ATK10K6 | |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...