TK10 K13 BRECOFLEX®
Polyurethane, steel reinforced, extruded truly endless, T Profile in metric pitch with trapezoidal toothform, self-tracking
Available types for TK10K13
- Standard Plus extra accuracy versions from 1500 to 12000mm
- E: with E-tension members for increased flexibility
- Standard single sided
- Nylon tooth facing (PAZ)
- Available with Stainless Steel tension members**
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
Please note:
- On 75 & 100 wide belts tracking guide will not be cogged unless requested.
- Lengths in multiples of 1 tooth available*
- Belts over 20,000mm long on request
- * Minimum quantities may apply
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth | Length | No. teeth |
|---|---|---|---|---|---|
| 1500 | 150 | 2650 | 265 | 5000 | 500 |
| 1560 | 156 | 2800 | 280 | 5300 | 530 |
| 1610 | 161 | 3000 | 310 | 5600 | 560 |
| 1750 | 175 | 3150 | 315 | 6000 | 600 |
| 1780 | 178 | 3350 | 335 | 6300 | 630 |
| 1880 | 188 | 3750 | 375 | 6700 | 670 |
| 1960 | 196 | 4000 | 400 | 7100 | 710 |
| 2250 | 225 | 4250 | 425 | 7500 | 750 |
| 2360 | 236 | 4500 | 450 | 8000 | 800 |
| 2500 | 250 | 4750 | 475 | 9000 | 900 |
| Belt widths (mm)-Intermediate belt widths on request | ||
|---|---|---|
| 50 | 75 | 100 |
| TK10K13 BFX | Available lengths & versions | |
|---|---|---|
| Standard lengths | See table on the right | |
| Any number of teeth available from | 1,200mm up to 22,000mm | |
| Intermediate lengths | from 1,200mm | o |
| Standard Plus version | 1,200mm up to 22,000mm | |
| Over 22,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel or Aramid tension member | o | |
| PAZ | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
| TK10 K13 – Allowable tensile load | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 50 | 75 | 100 | ||
| Tension member loadings | Fadm(N) | 3800 | 5800 | 7800 | ||
| Belt weight | kg/m | 0.283 | 0.397 | 0.510 | ||
Drive Type A
| Type A | TK10K13 |  |
|---|---|---|
| Zmin | 25 | |
| dmin | 80 |
Drive Type B
| Type B | TK10K13 |  |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...