ATK10 K6 BRECOFLEX®
Polyurethane, steel reinforced, extruded truly endless, High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
Available endless lengths for ATK10 K6
- For preferred lengths refer to table
- Belts under 1,500mm not available
- Over 1,500mm belts lengths available in multiples of 1 tooth2)
- Over 20,000mm please enquire
| ATK10K6 BFX | Available lengths and versions | ||
|---|---|---|---|
| Standard lengths | See table on the right | ||
| Any number of teeth available from | b=50mm | from 720mm | |
| 1,080mm | up to 22,000mm | ||
| Intermediate lengths | b=50mm | from 720mm | o |
| b=100mm | up to 1,080mm | ||
| Standard plus version | b=50mm from 720mm | ||
| 1,080mm up to 22,000mm | |||
| Over 22,000mm | On request | ||
| Standard material | TPUST11) | ||
| Steel tension member (standard) | x | ||
| E tension member (standard) | o | ||
| Stainless Steel tension member | o | ||
| PAZ | from 1,500mm | x | |
| DL/DL-PAZ | o | ||
| DR/DR-PAZ | o | ||
| T/T-PAZ | – | ||
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
2) Minimum quantities may apply
| Belt widths b (mm) – Intermediate belt widths on request | |
|---|---|
| 50 | 100 |
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth | Length | No. teeth |
| 1500 | 150 | 2650 | 265 | 4750 | 475 |
|---|---|---|---|---|---|
| 1600 | 160 | 2800 | 280 | 5000 | 500 |
| 1700 | 170 | 3000 | 300 | 5300 | 530 |
| 1800 | 180 | 3150 | 315 | 5600 | 560 |
| 1900 | 190 | 3350 | 335 | 6000 | 600 |
| 2000 | 200 | 3550 | 355 | 6300 | 630 |
| 2120 | 212 | 3750 | 375 | 6700 | 670 |
| 2240 | 224 | 4000 | 400 | 7100 | 710 |
| 2360 | 236 | 4250 | 425 | 7500 | 750 |
| 2500 | 250 | 4500 | 450 | 8000 | 800 |
Technical Specification
| ATK10K6 – Allowable tensile load | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 50 | 100 | |||
| Tension member loadings | Fadm(N) | 7750 | 16000 | |||
| Belt weight | AT10-K6 | 0.290 | 0.581 | |||
| AT10-K6-DL | 0.386 | 0.766 | ||||
| AT10-K6-DR | 0.445 | 0.886 | ||||
Drive Type A
| Type A | ATK10- K6 | ATK10- K6-DL | ATK10- K6-DR |  |
|---|---|---|---|---|
| Zmin | 20 | 25 | 25 | |
| dmin | 80 | 80 | 80 |
Drive Type B
| Type B | ATK10- K6 | ATK10- K6-DL | ATK10- K6-DR | |
|---|---|---|---|---|
| Zmin | 25 | 25 | 25 | |
| dmin | 120 | 120 | 120 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...