TK5 K6 BRECOFLEX®
Polyurethane, steel reinforced, extruded truly endless, T Profile in metric pitch with trapezoidal toothform, self-tracking
Available types for TK5K6
- Standard Plus extra accuracy versions from 720* to 12000mm
- E: with E-tension members for increased flexibility
- Standard single sided
- Nylon tooth facing (PAZ)
- Available with Stainless Steel tension members**
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
Please note:
- Lengths in multiples of 1 tooth available(1)
- Belts over 20,000mm long on request
- * 50 & 75mm widths. From 1,075mm for other widths
- ** Minimum quantities may apply
Standard lengths (mm)/Number of teeth |
---|
Length | No. teeth | Length | No. teeth | Length | No. teeth |
1075 | 215 | 2240 | 448 | 4500 | 900 |
---|---|---|---|---|---|
1100 | 220 | 2360 | 472 | 4750 | 950 |
1215 | 243 | 2500 | 500 | 5000 | 1000 |
1380 | 276 | 2650 | 530 | 5300 | 1060 |
1400 | 280 | 2800 | 560 | 5600 | 1120 |
1500 | 300 | 3000 | 600 | 6000 | 1200 |
1600 | 320 | 3150 | 630 | 6300 | 1260 |
1700 | 340 | 3350 | 670 | 6700 | 1340 |
1800 | 360 | 3550 | 710 | 7100 | 1420 |
1900 | 380 | 3750 | 750 | 7500 | 1500 |
2000 | 400 | 4000 | 800 | ||
2120 | 424 | 4250 | 850 |
Technical Specification
TK5K6 – Admissible tensile force of the belt F adm/Belt weight | ||||||
---|---|---|---|---|---|---|
Belt width | b (mm) | 50 | 50 | |||
E/Steel tension member | Fadm(N) | 1920 | 3930 | |||
Belt weight | kg/m | 0, 123 | 0, 232 |
Belt widths (mm) Intermediate belt widths on request | |
---|---|
50 | 100 |
TK5K6 BFX | Available lengths & versions | ||
Standard lengths | See table on the left | ||
---|---|---|---|
Any number of teeth available from | b=50mm | from 720mm | |
1,075mm up to 15,000mm | |||
Intermediate lengths | b=50mm | from 720mm | o |
b=100mm | from 1,075mm | ||
Standard Plus version | b=50mm from 720mm | ||
1,075mm up to 15,000mm | |||
Over 15,000mm | On request | ||
Standard material | TPUST11) | ||
Steel tension member (standard) | x | ||
E tension member (standard) | o | ||
Stainless Steel or Aramid tension member | o | ||
PAZ | from 1,075mm | x | |
DL/DL-PAZ | – | ||
DR/DR-PAZ | – | ||
T/T-PAZ | – |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Drive Type A
Type A | TK5K6 | |
---|---|---|
Zmin | 25 | |
dmin | 40 |
Drive Type B
Type B | T10 | |
---|---|---|
Zmin | 25 | |
dmin | 60 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)