BAT10 BRECOFLEX®
Polyurethane, Steel reinforced, extruded truly endless, revolutionary curved tooth design, reduced noise, vibration and polygonal effect
BRECOFLEX® timing belts BAT10
- Polyurethane, Steel reinforced, extruded open and joined
- Revolutionary curved tooth design, reduced noise, vibration and polygonal effect
Available endless lengths for BAT10:
- For preferred lengths refer to table
- Under 1,100mm, max. width is 50mm, further lengths upon request
- Over 1,500mm belts lengths available in multiples of 1 tooth*
- Over 20,000mm please enquire
Please note: * Minimum quantities may apply
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth |
| 1100 | 110 | 2240 | 224 |
|---|---|---|---|
| 1150 | 115 | 2500 | 250 |
| 1210 | 121 | 2800 | 280 |
| 1240 | 124 | 3000 | 300 |
| 1250 | 125 | 3550 | 355 |
| 1320 | 132 | 4000 | 400 |
| 1400 | 140 | 4500 | 450 |
| 1500 | 150 | 5000 | 500 |
| 1600 | 160 | 5600 | 560 |
| 1700 | 170 | 6000 | 600 |
| 1800 | 180 | 6700 | 670 |
| 1900 | 190 | 7100 | 710 |
| 2000 | 200 | 7500 | 750 |
Technical Specification
| BAT10 – Allowable tensile load by belt width | |||||
|---|---|---|---|---|---|
| Belt width | b (mm) | 32 | 50 | 75 | 100 |
| Tension member loadings | Fadm(N) | 4750 | 7750 | 12000 | 16000 |
| Belt weight | kg/m | 0.180 | 0.290 | 0.436 | 0.581 |
| Belt widths (mm)-Intermediate belt widths on request | |||
|---|---|---|---|
| 32 | 50 | 75 | 100 |
| BAT10 BFX | Available lengths & versions | |
| Standard lengths | See table on the left | |
|---|---|---|
| Any number of teeth available from | b=50mm: from 720mm | |
| 1,100mm up to 22,000mm | ||
| Intermediate lengths | from 1,100mm1) | o |
| Standard Plus version | 1,100mm up to 22,000mm1) | |
| Over 22,000mm | On request | |
| Standard material | TPUST12) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel or Aramid tension member | o | |
| PAZ | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) b=50mm from 720mm
2) Further materials on request
Drive Type A
| Type A | BAT10 |  |
|---|---|---|
| Zmin | 20 | |
| dmin | 60 |
Drive Type B
| Type B | BAT10 |  |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...