ATK20 K13 BRECO® Open Length (M)/Joined (V)
Polyurethane, Steel reinforced, extruded open length & joined – High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking.
BRECO® timing belts ATK20K13
- Polyurethane, Steel reinforced, joined & open length belting
- High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
Available types for ATK20K13:
- Single sided
- Nylon tooth facing (PAZ)
- Nylon back facing (PAR)
- Nylon both facing (PAZ/PAR)
- Special polyurethanes upon request
- Antistatic, coloured, machined,ground and punched belts
Technical Specification
| ATK20 K13 – Allowable tensile load by belt width | |||
|---|---|---|---|
| Belt width | Belt width | 75 | 100 |
| Tension member loadings Fadm(N) |
M | 16800 | 22400 |
| V | 8400 | 11200 | |
| T2.5 Belt weight | kg/m | 0.730 | 0.995 |
| Belt widths (mm) Intermediate belt widths on request | |
|---|---|
| 75 | 100 |
| T5 (M/V)) | Available lengths and versions | |
| Standard delivery lengths (M) | Rolls of 50m | |
|---|---|---|
| Cut to lengths/lengths > 100m | On request | |
| Minimum length joined (V) | 1,000mm | |
| Standard material | TPUST1) | |
| Steel tension member (standard) | x | |
| E tension member | – | |
| Stainless Steel or Aramid member | o | |
| PAZ | x | |
| PAR | – | |
| PAZ-PAR | – | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T- PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Drive Type A
| Type A | ATK20K13 | |
|---|---|---|
| Zmin | 20 | |
| dmin | 120 | |
 |
||
Drive Type B
| Type B | ATK20K13 | |
|---|---|---|
| Zmin | 25 | |
| dmin | 180 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...