Polyurethane, Steel reinforced, extruded truly endless, self tracking with staggered teeth.
SFAT10 BRECOFLEX®
BRECOFLEX® timing belts SFAT10
- Polyurethane, Steel reinforced, extruded endless
- Self-tracking with staggered teeth
Available endless lengths for SFAT10:
- For preferred lengths refer to table
- Over 1,500mm belts lengths available in multiples of 1 tooth*
- Over 22,000mm please enquire
Please note: *Minimum quantities may apply
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth |
|---|---|---|---|
| 1100 | 110 | 2500 | 250 |
| 1200 | 120 | 2800 | 280 |
| 1300 | 130 | 3000 | 300 |
| 1400 | 140 | 3550 | 355 |
| 1500 | 150 | 4000 | 400` |
| 1600 | 160 | 4500 | 450 |
| 1700 | 170 | 5000 | 500 |
| 1800 | 180 | 5600 | 560 |
| 1900 | 190 | 6000 | 600 |
| 2000 | 200 | 6700 | 670 |
| 2240 | 224 | 7100 | 710 |
| 2500 | 250 | 7500 | 750 |
Technical Specification
| SFAT 10 – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 50 | 75 | 100 | ||
| Tension member loadings | Fadm(N) | 7750 | 12000 | 16000 | ||
| Belt weight | kg/m | 0.290 | 0.436 | 0.581 | ||
| Belt widths (mm) Intermediate belt widths on request | ||
|---|---|---|
| 50 | 75 | 100 |
| SFAT10 BFX | Available lengths & versions | |
| Standard lengths | See table on the left | |
|---|---|---|
| Any number of teeth available from | 1,100mm up to 22,000mm | |
| Intermediate lengths | from 1,10mm | o |
| Standard Plus version | 1,100mm up to 22,000mm | |
| Over 22,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member (standard) | o | |
| Stainless Steel or tension member | o | |
| PAZ | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Drive Type A
| Type A | SFAT10 | |
|---|---|---|
| Zmin | 15 | |
| dmin | 50 | |
 |
||
Drive Type B
| Type B | SFAT10 | |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...