SFAT10 BRECO® Open Length (M)/Joined (V)
Polyurethane, Steel reinforced, extruded open length & joined High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
BRECO® timing belts SFAT10
- Polyurethane, Steel reinforced, extruded open and joined
- Self-tracking with staggered teeth
Available types for SFAT10:
- Single sided
- Nylon tooth facing (PAZ)
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
Drive Type A
| Type A | SFAT10 | |
|---|---|---|
| Zmin | 15 (25) | |
| dmin | 50 (80) | |
 |
||
Drive Type B
| Type B | SFAT10 | |
|---|---|---|
| Zmin | 25 | |
| dmin | 120 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Values in brackets apply to jointed timing belts.
| Belt widths (mm) Intermediate belt widths on request |
||
|---|---|---|
| 50 | 75 | 100 |
| SFAT10 (M/V) | Available lengths and versions | |
|---|---|---|
| Standard delivery lengths (M) | Rolls of 50 or 100m | |
| Cut to lengths/lengths > 100m | On request | |
| Minimum length joined (V) | 880mm | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | x | |
| E tension member | o | |
| Stainless Steel tension member | o | |
| PAZ | x | |
| PAR | x | |
| PAZ-PAR | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T- PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Technical Specification
| SFAT10 – Allowable tensile load by belt width | ||||
|---|---|---|---|---|
| Belt width | b (mm) | 50 | 75 | 100 |
| Tension member loadings Fadm(N) | M | 7500 | 10500 | 16000 |
| V | 3750 | 5250 | 8000 | |
| Belt weight | kg/m | 0.290 | 0.436 | 0.581 |
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...