ATK5 K6 BRECOFLEX®
Polyurethane, steel reinforced, extruded truly endless, High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking
BRECOFLEX® timing belts ATK5 K6
- Polyurethane, steel reinforced, open length
- High Power AT Profile in metric pitch withtrapezoidal toothform, self-tracking
Available versions for ATK5 K6:
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
| Belt widths (mm) Intermediate belt widths on request | |||
|---|---|---|---|
| 32 | 50 | 75 | 100 |
| BFX ATK5K6 | Available lengths & versions | |
| Standard lengths | See table on the right | |
|---|---|---|
| Any number of teeth available from | 1,075mm up to 15,000mm | |
| Intermediate lengths | From 1,075mm | o |
| Standard Plus version | 1,075mm up to 15,000mm | |
| Over 15,000mm | On request | |
| Standard material | TPUST11) | |
| Steel tension member (standard) | – | |
| E tension member (standard) | x | |
| Stainless Steel or Aramid tension member | o | |
| PAZ | x | |
| DL/DL-PAZ | – | |
| DR/DR-PAZ | – | |
| T/T-PAZ | – | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
| Standard lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Length | No. teeth |
| 1075 | 215 | 3000 | 600 |
|---|---|---|---|
| 1100 | 220 | 3150 | 630 |
| 1215 | 243 | 3350 | 670 |
| 1380 | 276 | 3550 | 710 |
| 1400 | 280 | 3750 | 750 |
| 1500 | 300 | 4000 | 800 |
| 1600 | 320 | 4250 | 850 |
| 1700 | 340 | 4500 | 900 |
| 1800 | 360 | 4750 | 950 |
| 1900 | 180 | 5000 | 1000 |
| 2000 | 400 | 5300 | 1060 |
| 2120 | 420 | 5600 | 1120 |
| 2240 | 448 | 6000 | 1200 |
| 2360 | 472 | 6700 | 1340 |
| 2500 | 500 | 7100 | 1420 |
| 2650 | 530 | 7500 | 1500 |
| 2800 | 560 |
ATK5 K6-E current max.
length = 15,000mm
Technical Specification
| ATK5 K6 – Allowable tensile load by belt width | ||||||
|---|---|---|---|---|---|---|
| Belt width | b (mm) | 32 | 50 | 75 | 100 | |
| Tension member loadings | Fadm(N) | 2660 | 4200 | 6370 | 8610 | |
| Belt weight | kg/m | 0.107 | 0.167 | 0.250 | 0.334 | |
Drive Type A
| Type A | ATK5K6 | |
| Zmin | 25 | |
| dmin | 40 | |
 |
||
Drive Type B
| Type B | ATK5K6 | |
| Zmin | 25 | |
| dmin | 80 | |
 |
||
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...